Carpet cleaning by bonnet method

This cleaning process also helps prevent the growth of mold and mildew by removing all dirt and moisture content from our carpets. We need to vacuum all the area to be cleaned before the cleaning process starts. Cleaning bonnet is a very simple and easy method that includes the use of absorbent electrodes.

In this method, we need to place a bonnet at the bottom of the buffer. After dipping this arrangement in a shampoo solution, we need to let it move through the surface of the carpet to be cleaned. One of the disadvantages of this method is that it can cause pile distortion and fiber damage. These damages occur due to the friction between the bonnet and the carpet.

Therefore, one must be aware that the bonnet and the carpet are damp for the smooth movement of the bonnet through the surface of the carpet. To provide this movement, the bonnet must be attached to a low-speed rotating floor machine. As the bonnet moves through the surface of the colored carpet material, all stains are absorbed by the bonnet.

We need to repeat this cleaning procedure until no soil is transferred from the carpet to the bonnet. When the Satin bonnets is dirty to its highest level, we need to remove all soil from it by washing deeply. After removing dirt, the bonnet can be reused. The carpet should be dried by vacuuming after removing dirt. The drying time for a typical rug is approx. 30 minutes. Short drying time property of this method helps to bring our cleaned carpet back to its normal phase immediately.

0 Comments Write your comment

    1. Loading...